700 Ton Hydraulic Scrap Steel Shearing Machine for Heavy Scrap Cutting

Meta Description

A 700 ton hydraulic scrap steel shearing machine designed for heavy scrap cutting, steel plate scrap processing and scrap yard size reduction, with twin 3500KN shearing cylinders and a 7500 mm feeding box.

H1

700 Ton Hydraulic Scrap Steel Shearing Machine for Heavy Scrap Cutting

Product Overview

The 700 ton hydraulic scrap steel shearing machine is designed for heavy scrap steel size reduction in scrap yards, recycling plants and steel processing facilities.

For oversized steel scrap, manual cutting or small shears may not provide enough force or feeding space. The Q91Y-700W model uses twin YG420/300 shearing cylinders, each with 3500KN full thrust, supporting heavy-duty cutting under the specified material range.

With a 7500×1600×800 mm feeding box, this machine can receive bulky, irregular and long scrap materials before hydraulic pushing, pressing and shearing.

Key Specifications

Heavy Scrap Cutting Range

According to the technical parameter sheet, the machine is suitable for steel materials with Δb≤450 MPa.

This makes the machine suitable for processing heavy steel scrap, steel plate offcuts, round steel scrap and square steel scrap within the stated material strength range.

Why It Fits Heavy Scrap Applications

Twin 3500KN Shearing Cylinders

The shearing system is built with two hydraulic shearing cylinders. Each cylinder provides 3500KN full thrust, giving the machine a clear data-based foundation for heavy scrap cutting.

1600 mm Blade Length

The 1600 mm blade length allows the machine to handle wider scrap sections compared with smaller cutting equipment.

25 MPa Hydraulic System

The hydraulic system works at 25 MPa, supporting the machine’s shearing, pushing and pressing actions during industrial scrap processing.

Typical Applications

This machine is suitable for:

Scrap steel recycling yards
Steel plate scrap cutting
Steel mill scrap preparation
Heavy melting scrap processing
Industrial metal waste size reduction
Furnace charge preparation before melting

Recommended Buyer Information

Before model confirmation, buyers should provide:

Material type
Maximum material size
Material thickness
Expected hourly or daily capacity
Feeding method
Power supply requirement
Installation site layout

For high-strength steel, alloy steel or special-shaped scrap, the actual cutting condition should be checked before model selection.

Q3: Why is twin shearing cylinder design important?

The Q91Y-700W uses two YG420/300 shearing cylinders, each with 3500KN full thrust. This structure provides a clear hydraulic force basis for heavy-duty scrap cutting.

Instead of only describing the machine as “powerful,” this parameter helps buyers understand the actual cylinder configuration behind the cutting force.

Q4: Is this machine suitable for steel plate scrap?

Yes. Under the stated material condition of Δb≤450 MPa, the machine can cut steel plate up to 70×500 mm. This makes it suitable for steel plate offcuts, industrial steel waste and prepared scrap processing.

Q5: What information should buyers provide before quotation?

Buyers should provide scrap material type, maximum size, thickness, expected capacity, feeding method and local power supply. These details help confirm whether the 700 ton model matches the actual working condition.